Description
Product Code: RD-PN10
10’000 User Proximity Reader with Remote Control
Main features
Manual and remote control programming
IP rating: IP68, weather resistant – Epoxy resin filled for enhanced weather protection
LED x 3 indication
Colour: Zinc Aloy
Voltage: 12v-24v DC input
Current: 40mA – 75ma
Reading range: 20mm – 60mm
Card type: EM 125khz cards and/or key fobs
Card capacity: 10,000 (Ten Thousand)
Relay outputs: 1 x 2amp with N.C and N.O contacts
Wiegand output: Yes
Exit button input: Yes
Fitting: Surface mount
RD-PN10 10’000 User Proximity Reader with Remote Control
Key Features:
A) All features are manual or remote programmable
B) Non-volatile memory in the event of a power failure
C) Hugh 10’000 User
Fitting: Surface mount
Unit size: 115h x 56w x 22d
Remote control size: 85h x 32w x 5d
We offer a extensive range of Digital coded access keypads, and access control systems which can be used for a variety of door entry access control solutions – whether it be for controlled access to an office, house or garage we will have the correct solution for you.
Our range of standalone or self-contained digital keypads and key fob readers have between 1 and 3 relay outputs – with or without proximity card/key fob reader and are ideal for either internal or external use available with single 12v dc or dual 12v – 24v AC/DC input
If the Product Code: RD-PN10 10’000 User Proximity Reader with Remote Control is not the unit for you we will have another solution!
Try us and put us, our products, our service and price to the test, you wont be disappointed.
Can I use the RD-PN10 card reader outside?
Yes, it is IP68 rated and totally protected against dust and protection against heavy seas, or powerful jets of water
Will the RD-PN10 card reader use any standard Wiegand RFID 125 khz card or key fob?
Yes it can use either
Do you program cards or key fobs via the card reader?
Yes, it’s so simple to do. The card reader is supplied with a Master ADD and a Master DELETE card for this. It’s also supplied with a remote control which is ideal for the deletion of lost or missing cards or fobs
NB: It is advisable to make a note of the Unique ID (U.I.D) 10 digit number printed on the cards or fobs
What happens if I lose the Master ADD and Master Delete cards?
Don’t panic!, but you will need to reset the card reader to replace them. You can use any cards or key fobs you like to create a new Master ADD and Master DELETE card. You will not lose any previously programmed cards or fobs by resetting the unit – The reset procedure is detailed within the online manual
How do I delete cards or key fobs if I have lost them?
You can delete cards or key fobs in two ways, the first is by physically having the card or key fob and use the Master DELETE card, or if you have lost the card or fob, you can use the remote control by entering the U.I.D 10 digit number
Can I use two card readers to access and exit a door?
Yes, please refer to the drawings we have for download that will show you this
If I wanted two card readers, can I program the same card or key fob to activate both units?
Yes, you can actually connect up to 9 x SR2’s together and upload the user information from the first SR2 to all additional SR2 readers. Please refer to page 6 of the manual we have for download that will show you this
Can I operate my automatic gate with this?
Yes, please refer to the drawings we have for download that will show you this
What cable do I need?
You can use any cable you like for this, we suggest using standard alarm cable that you can purchase this from us also.
It is advisable to periodically clean the keypad facia to prevent ingress of dirt or general grime which will accumulate between the buttons and could cause the keypad buttons to become “Sticky”. This is common with all mechanical moving parts and more so dependent upon the installation area and general usage, however, regular preventive maintenance will ensure long lasting operation of the item
