2amp Power – 12vdc Switchmode PSU (Small)

2amp Power – 12vdc Switchmode PSU (Small)


Product Code: PSU-D1542-A

Dycon 2amp 12vdc switchmode Power Supply Unit – Size Small (235mm x 170mm x 85mm)

Made in the UK. Powering security, fire, CCTV and access control systems

 

 

Category:

Description

Product Code: PSU-D1542-A

Dycon 2amp Power Supply – 12vdc Switchmode Power Supply Unit – Size Small

Main features
Type: Advanced Switchmode Technology
Input: 230VAC +10% -15%; 50Hz ± 15%
Output: Maximum 13.7VDC nominal
Load Current: 2amp
IP Rating: Internal Use Only
Style: Clam Shell
Monitoring: LED monitoring
Battery: Yes

Key Features:
A) Anti-‘spike’ filtering protects access system from downtime
B) Unique battery charging feature reduces strain on batteries
C) Self-resetting fuses

Size: 235mm x 170mm x 85mm

 

Dycon’s D154X Series units are available as 1, 2, 3 and 5 Amp switched-mode power supplies, with three separate LED indicators that show the operational status of the unit. A green LED indicates that the Mains AC power is present, an orange LED lights when the unit is operating on standby battery power and a red LED lights if the electronic fuse has been tripped. These power
supplies are protected against electrical ‘spikes’ caused by the switching of highly inductive loads (door strikes and locks). They remove the chance of inductive kickback blowing a fuse and causing a door to remain closed or open, a frequent cause of personnel delays and expensive engineer call outs.

The range also features intelligent and capacitive load switching surge protection and snubbing. Optional output splitters enable a single power supply to drive a wide variety of different devices. These include 8-way splitters with individually-fused outputs, 4-way splitters with electronically-fused outputs or individually glass-fused outputs. Available is also a special unit that can power up to 4 cameras with loop-through connections for video signals, making it ideally suited for use in powering CCTV systems.

Like all our products the switch-mode Power supplies are CE approved and have passed CE standards to EMC & RFI EN STANDARDS.

If the PSU-D1542-A 2amp Power Supply in 12volt Switchmode PSU – Size Small is not the unit for you we will have another solution!

Try us and put us, our products, our service and price to the test, you wont be disappointed.

 

Download Data Sheet Download Installation Manual

 

Instructions

  • What is the maximum output current of a small 2Amp 12VDC switchmode PSU?

The maximum output current of this type of power supply is 2 amperes, meaning it can deliver up to 24 watts of power.

 

  • What devices can I power with a small 2Amp 12VDC switchmode PSU?

This power supply can be used to power a variety of devices that require a 12VDC power source and draw up to 2 amperes of current. Some examples include small LED lighting systems, CCTV cameras, and portable electronic devices.

 

  • Is a small 2Amp 12VDC switchmode PSU more efficient than other types of power supplies?

Yes, switchmode power supplies are generally more efficient than linear power supplies because they waste less energy as heat. A small switchmode PSU is also usually more compact and lightweight than other types of power supplies.

 

  • Can I connect multiple devices to a small 2Amp 12VDC switchmode PSU?

It is possible to connect multiple devices to this power supply, but you need to ensure that the total current draw of all devices does not exceed 2 amperes. If it does, you risk damaging the power supply or your devices.

 

  • Is it safe to use a small 2Amp 12VDC switchmode PSU?

Yes, switchmode power supplies are generally safe to use as long as you follow the manufacturer’s instructions and use the power supply within its specifications. However, like any electronic device, there are potential hazards, so it’s important to use caution and follow proper safety protocols.

It is advisable to to allow for a minimum of 25% spare on load current as below examples:

1amp use max 750ma

2amp use max 1.5amps

3amp use max 2.25amps

5amp use max 3.75amps