One Door Access Control Board

One Door Access Control Board

Product Code: AC-ASP-1DOOR

One Door Access Control Board

Is the answer for controlling, restricting and monitoring movement around any building from single, double or multiple door installations Via LAN or WAN connection.

Combining Networked PC Based Access Control with Time and Attendance monitoring through its user friendly interface.

FREE Demonstrations, Training, Site Visits and Commissioning available.


Product Code: AC-ASP-1DOOR

One Door Access Control Board

Board features
Doors: One door
Readers: Two (reader in / Reader out)
Exit Relay: One (NO / COM)
Locking Relay: One (NO / NC / COM)
Door Monitoring: One
LED: EIGHT Led indications
Connection: RJ45 for LAN or WAN connection
Size: 173l x 118w x 33h

System features
Users: 20’0000
Events: Unlimited with 100’0000 off line events
Doors: Unlimited
Operating Systems: Windows XP, Windows 7 and Windows 8 compatible
Control Boards: One, Two, Three and Four doors control boards in metal Power supplies with battery back up
Readers: In and out, IP68 rated, proximity Only, Pin and proximity
Connection: RJ45 for LAN or WAN connection
Other Functions: Door Interlocking, Anti Pass Back, Super Pin, Time and attendance, Holiday management, Multi users with permission levels, and much much more!
Alarm Functions: Fire Alarm/ Emergency Door Release / breakglass – Door Forced – Door Open to long – Forced lock – Invalid reader attempt – Threat Code

FREE Demonstrations, Training, Site Visits and Commissioning available

We offer a extensive range of Door Entry and Access control systems and solutions which can be used for a variety of situation – whether it be for controlled access to an office, hospital, club or any place of work we will have the correct solution for you.

As well as our PC Based Access Control System we offer a range of standalone or self-contained digital keypads and key fob readers have between 1 and 3 relay outputs – with or without proximity card/key fob reader and are ideal for either internal or external use available with single 12v dc or dual 12v – 24v AC/DC input

If the AC-ASP-1DOOR – One Door Access Control Board is not the unit for you we will have another solution!

Try us and put us, our products, our service and price to the test, you wont be disappointed.

Download User manual Download Quick Guide Download Wiring guide Download Quick PDF

AC-ASP-1DOOR single door pc access control board

Wiring Guide


What operating system can the software use?
The system is Windows based from XP onwards and up to Windows 8, including Windows Server for multi user operation

How easy is it to set up/install the software?
Easy, the software works with any version of Microsoft Windows operating system and can be operational within 15 minutes

I have downloaded the software and it can use SQL?
Yes this is correct, however, we cannot support customers requiring to use SQL as their own database

Can I plug the controller directly in to my laptop as I do not have a router?
Yes, you can. An Ethernet cable is required and you just plug it into the controller and in to your computer – away you go

LAN connection via a router is the most common setup for small networks. WAN (Wide Area Network) is via internet access outside of the typical network you might have. For this you would require Port Forwarding via your router – all common routers have this facility

Our quick setup guide will give you an idea on how to do this

Can I configure a multi door system as you only have 1, 2, 3 and 4 door control systems available?
Yes you can, simply by adding extra access control cards and card readers to your order. You would simply connect the additional control cards to your router or hub and add the control systems into the software

How many control systems can I add?
There is no limit because it is LAN/WAN connection

Can I use a card reader as an exit device in place of an exit button?
Yes, you can use either or both

Can I use a finger print reader?
Yes you can. We do not supply finger print readers but we can provide instructions on how to do this and it is very simple. Please email us for this

What cable distances can the card readers operate to?
The card reader/s should be no more than 80 – 90mtr from the control board

What cable do I need?
We would suggest between 6 core and 8 core shielded twisted pair alarm cable at the very least, we offer reader cable that will perform to the required levels. If you wish to supply your own cable consider a quality cable such as Belden 9538 shielded cable for best results. Do NOT use CAT5/6 cable for the card readers

Does the control board and software monitor who enters the door and who exits the door?
Yes it does as long as you have a card reader for both entry and exit

I have some existing Mifare cards/ key fobs, will they work with this system?
Mifare cards/key fobs will not work with our card readers as they are Wiegand RFID readers, however, if you have Mifare card readers then the software will recognise them and will allow you to use your Mifare cards/fobs

Where do the control cards fit?
They are supplied with self-adhesive sticky pads and you simply fit them yourself inside the power supply

Do I need the PC on all the time, and what happens in the event of a power failure?
No, you do not need to have your computer on all the time. The control board will retain up to 100,000 transactions for offline use – it will then overwrite the first transaction in the event that you do not “UPLOAD” the transactions to your computer

You would require battery back-up if a power failure occurs otherwise the system will not work

Can I fit a battery in the power supply?
Yes you can.

It is advisable to periodically clean the keypad facia to prevent ingress of dirt or general grime which will accumulate between the buttons and could cause the keypad buttons to become “Sticky”. This is common with all mechanical moving parts and more so dependent upon the installation area and general usage, however, regular preventive maintenance will ensure long lasting operation of the item