Product Code: AC-ASP8002
Two Door Access Controller Board c/w Power Supply
Doors: Two door
Readers Per Door: Two (reader in / Reader out)
Exit Relay Per Door: One (NO / COM)
Locking Relay Per Door: One (NO / NC / COM)
Door Monitoring Per Door: One
LED: EIGHT Led indications
Connection: RJ45 for LAN or WAN connection
Power Supply features
Mains Input: 190v – 265vAC
Output: 13.8v DC
Load Current: 3amp
LED: Three – Mains, Battery, Fault
Box: White Metal
Other: CE Approved to EMC & RFI EN Standards, Battery Charging, Deep Discharge Protection, 30% more energy efficient
Size: 310h x 340w x 80d
Events: Unlimited with 100’0000 off line events
Operating Systems: Windows XP, Windows 7 and Windows 8 compatible
Control Boards: One, Two, Three and Four doors control boards in metal Power supplies with battery back up
Readers: In and out, IP68 rated, proximity Only, Pin and proximity
Connection: RJ45 for LAN or WAN connection
Other Functions: Door Interlocking, Anti Pass Back, Super Pin, Time and attendance, Holiday management, Multi users with permission levels, and much much more!
Alarm Functions: Fire Alarm/ Emergency Door Release / breakglass – Door Forced – Door Open to long – Forced lock – Invalid reader attempt – Threat Code
FREE Demonstrations, Training, Site Visits and Commissioning available
We offer a extensive range of Door Entry and Access control systems and solutions which can be used for a variety of situation – whether it be for controlled access to an office, hospital, club or any place of work we will have the correct solution for you.
As well as our PC Based Access Control System we offer a range of standalone or self-contained digital keypads and key fob readers have between 1 and 3 relay outputs – with or without proximity card/key fob reader and are ideal for either internal or external use available with single 12v dc or dual 12v – 24v AC/DC input
If the AC-ASP8002 – Two Door Access Controller Board c/w Power Supply is not the unit for you we will have another solution!
Try us and put us, our products, our service and price to the test, you wont be disappointed.
What operating system can the software use?
The system is Windows based from XP onwards and up to Windows 8, including Windows Server for multi user operation
How easy is it to set up/install the software?
Easy, the software works with any version of Microsoft Windows operating system and can be operational within 15 minutes
I have downloaded the software and it can use SQL?
Yes this is correct, however, we cannot support customers requiring to use SQL as their own database
Can I plug the controller directly in to my laptop as I do not have a router?
Yes, you can. An Ethernet cable is required and you just plug it into the controller and in to your computer – away you go
LAN connection via a router is the most common setup for small networks. WAN (Wide Area Network) is via internet access outside of the typical network you might have. For this you would require Port Forwarding via your router – all common routers have this facility
Our quick setup guide will give you an idea on how to do this
Can I configure a multi door system as you only have 1, 2, 3 and 4 door control systems available?
Yes you can, simply by adding extra access control cards and card readers to your order. You would simply connect the additional control cards to your router or hub and add the control systems into the software
How many control systems can I add?
There is no limit because it is LAN/WAN connection
Can I use a card reader as an exit device in place of an exit button?
Yes, you can use either or both
Can I use a finger print reader?
Yes you can. We do not supply finger print readers but we can provide instructions on how to do this and it is very simple. Please email us for this
What cable distances can the card readers operate to?
The card reader/s should be no more than 80 – 90mtr from the control board
What cable do I need?
We would suggest between 6 core and 8 core shielded twisted pair alarm cable at the very least, we offer reader cable that will perform to the required levels. If you wish to supply your own cable consider a quality cable such as Belden 9538 shielded cable for best results. Do NOT use CAT5/6 cable for the card readers
Does the control board and software monitor who enters the door and who exits the door?
Yes it does as long as you have a card reader for both entry and exit
I have some existing Mifare cards/ key fobs, will they work with this system?
Mifare cards/key fobs will not work with our card readers as they are Wiegand RFID readers, however, if you have Mifare card readers then the software will recognise them and will allow you to use your Mifare cards/fobs
Where do the control cards fit?
They are supplied with self-adhesive sticky pads and you simply fit them yourself inside the power supply
Do I need the PC on all the time, and what happens in the event of a power failure?
No, you do not need to have your computer on all the time. The control board will retain up to 100,000 transactions for offline use – it will then overwrite the first transaction in the event that you do not “UPLOAD” the transactions to your computer
You would require battery back-up if a power failure occurs otherwise the system will not work
Can I fit a battery in the power supply?
Yes you can.
It is advisable to periodically clean the keypad facia to prevent ingress of dirt or general grime which will accumulate between the buttons and could cause the keypad buttons to become “Sticky”. This is common with all mechanical moving parts and more so dependent upon the installation area and general usage, however, regular preventive maintenance will ensure long lasting operation of the item