Access Security Products

Complete 2wire Video Entry Kit


Product Code: ASP-VIDEO-KIT

Complete 2wire Video Entry Kit

The ASP-VIDEO-KIT is a complete Video Door entry Kit in One box. A simple 2wire system with touch screen modern internal monitors offering a cost effective method of Access Control to a single door with Visitor Video Entry.

Alternative kit are available or why not let us Design a kit just for you

 

Description

Product Code: ASP-VIDEO-KIT

Complete 2wire Video Entry Kit

DE-591-Kit  –  Door Entry features
Panel: Metal with Single Call button
Handset: Black 7″ Touch Screen Colour Monitor

ML-MINI – Locking Features
IP rating: Internal Use only
Voltage: 12v-24v DC input
Holding Force: Upto 600lbs (272kg)

EB-GD – Exit Features
IP rating: IP66
Type: Green Dome
Fitting: Green Surface or Flush Fit

EDR-ASP-21 – Emergency Door Release Features
IP rating: Internal
Type: Double Pole, Glass
Fitting: Green Surface or Flush Fit

PSU-1201-S- Power Supply Features
Load: 1amp
Voltage: 12vDC
Type: Switchmode, Boxed

BK-MINI-ZL- Bracket Features
Type: Z and L kit for Inward

Y7-12- Battery Features
Type: 7ah b12v Yucell by Yuasa

 

We offer a extensive range of Door Entry and Access control systems and solutions which can be used for a variety of situation – whether it be for controlled access to an office, hospital, club or any place of work we will have the correct solution for you.

As well as our PC Based Access Control System we offer a range of standalone or self-contained digital keypads and key fob readers have between 1 and 3 relay outputs – with or without proximity card/key fob reader and are ideal for either internal or external use available with single 12v dc or dual 12v – 24v AC/DC input

If the ASP-VIDEO-KIT – Complete 2wire Video Entry Kit is not the unit for you we will have another solution!

Try us and put us, our products, our service and price to the test, you wont be disappointed.

Download User manual Download Quick Guide Download wiring guide Download Quick PDF

Video Entry: DE-591-Kit

Locking: ML-MINI

Bracket: BK-MINI-ZL

Exit: EB-GD

Breakglass: EDR-ASP-21

Power: PSU-1201-S

Battery: Y7-12

What are the cable requirements?
The Prestige video door entry system can operate on CAT5/e, alarm or telephone cable but for best results you should use 1.0mm-1.5mm stranded twisted pair cable, especially if you have a rather long cable run. Whatever cable type you choose, it MUST be non-shielded and twisted paired.

There are two methods of cable installation. Old style ‘Loop in/out’ (Daisy chain format) or standard ‘Star Topology’ (All cables run to a central point) Star Topology requires a DBC4S 4 way distributor for every 4 x video monitors. The DBC4S 4 way distributor is also required if additional door panels are installed.

How many door panels and video monitors can I have?
You can have a total of 4 x door panels and 4-8 video monitors for each system but you will require 1 x DBC4S 4 way distributor for the door panels and 1 x DBC4S for the video monitors Whilst the DBC4S is a universal unit, you cannot have for example, 2 x video monitors and 2 x door panels connected to the same DBC4S unit

Rule of thumb is: 1 x DBC4S for multi door panels and 1 x DBC4S for 4 x video monitors (If the video monitors are cabled in the Star Topology format)
The DBC4S and all other additional items can be found on our website

Locking devices – What type of lock release can I use?
The video entry system can support any type of locking device you choose, however, this might require additional items to be purchased over and above the standard systems’ basic specification. The door panel will support any standard 12v dc ‘power to un-lock’ type lock release that must be rated at no more than 350ma

If the lock release is rated at more than 350ma then you might require an additional power supply such as our PSB 1amp 12v dc power supply. The supplied booklet will show you connections for using an external power supply

24v Lock release or 12v – 24v dc Magnetic lock
If you require to use the system with a 24v dc lock release or 12v – 24v dc magnetic lock then you will require the TR1 relay which can be ordered by using the ‘Option’ check above

Electric or automated gate
If you require to use the system with an electric or automated gate that requires a typical Normally Open trigger,

 

It is advisable to periodically clean the keypad facia to prevent ingress of dirt or general grime which will accumulate between the buttons and could cause the keypad buttons to become “Sticky”. This is common with all mechanical moving parts and more so dependent upon the installation area and general usage, however, regular preventive maintenance will ensure long lasting operation of the item