Product Code: KP-902
Slimline Access Control Keypad – Pin and/or Proximity
Rain hood: No, not required
Input: 12v DC input
Current rating: 60ma – 95ma
IP rating: IP65, weather resistant and vandal resistant
Keypad: Back – lit blue illuminated button keypad
Back box: Die cast surface mount
User codes: 1000 User codes and/or key fobs or cards for relay 1
Card or key fob: The keypad uses standard RFID proximity cards or key fobs
Relay outputs: Two, 1 x 2amp relay output with N.C. & N.O. contacts, relay two is 1 x 1amp with N.O contacts
Relay output timers: One from 1 second up to a possible 99,999 seconds (Over 24hours)
Exit button input: Yes
KP-902 Slimline Access Control Keypad – Pin and/or Proximity
A) All features are keyboard programmable
B) Non-volatile memory in the event of a power failure
C) 3 LED display indication status
Fitting: Surface mount
Size: 180h x 46w x 21/25d (Unit to edge of buttons) mm
We offer a extensive range of Digital coded access keypad and access control systems which can be used for a variety of door entry access control solutions – whether it be for controlled access to an office, house or garage we will have the correct solution for you.
Our range of standalone or self-contained digital keypads and key fob readers have between 1 and 3 relay outputs – with or without proximity card/key fob reader and are ideal for either internal or external use available with single 12v dc or dual 12v – 24v AC/DC input
If the KP-902 Slimline Access Control Keypad – Pin and/or Proximity is not the unit for you we will have another solution!
Try us and put us, our products, our service and price to the test, you wont be disappointed.
5 x RFID proximity cards or blue key fobs, whichever you choose
How are the connections made?
They are made via a 250mm wire harness as opposed to a conventional connector block due to its narrow width
What is the bell button for?
The bell button output provides a normally open contact, therefore you can connect it to any auxiliary item you wish such as a sounder
The bell button is ideal in situations where you require a keypad as well as means to alert you that a visitor has arrived as opposed to fitting a separate audio entry system or additional “doorbell”
Can I use this keypad outside?
Yes, it is IP65 rated and totally protected against dust and protection against heavy seas, or powerful jets of water
Will this keypad use any standard Wiegand EM125khz card or key fob?
Yes it can use either or a combination of both
Do you program key fobs or cards via the keypad?
Yes, it’s so simple to do
Can I use just key fobs or cards for access?
You can use any combination of either card or key fob & code, code only or card or key fob only – it’s fantastic!!
Can I add an extra exit button?
Can I use two keypads to access and exit a door?
If I wanted two keypads, can I program the same key fobs/cards to activate both units?
What does 4 – 8 PIN with or without # mean?
It simply means that you can have a 4 – 8 digit PIN code for the master code as well as a 4 – 8 digit PIN code for users. Some customers do not wish to enter the # button for PIN confirmation, with the KP-902 keypads you can have either
It is advisable to periodically clean the keypad facia to prevent ingress of dirt or general grime which will accumulate between the buttons and could cause the keypad buttons to become “Sticky”. This is common with all mechanical moving parts and more so dependent upon the installation area and general usage, however, regular preventive maintenance will ensure long lasting operation of the item