Access Security Products

Fail Secure Monitored Euro Release


Product Code: EL-EURO-SECURE-M

Fail Secure Monitored Euro Release (FAIL LOCK)

This 12vDC Dorcus EURO release comes with Latch / Lock monitoring and is ideal for fitting with existing night-latches. Supplied with adjustable jaw feature and Flush and surface mount fixing plates.

 

Category:

Description

Product Code: EL-EURO-SECURE-M

Fail Secure Monitored Euro Release (FAIL LOCK)

Product Features
Input: 12v DC
Type: Fail Secure – Power to open
Jaw Type: Adjustable to Suit 12mm throw
Jaw Strength: Upto 880lbs / 400kg
Current Draw: 360ma
IP Rating: Internal Use only
Lock Monitoring: Yes
Fitting: Flush
Flush Plate: 160h x 20w x 2d mm
Flush Body: 90 x 20w x 28d mm

 

Electric Release – Electric Strike – Euro Strike and Release – Ansi Strike and Release

An electric strike is an access control device used for doors. It replaces the fixed strike faceplate often used with a keeper Plate. A strike or release will normally presents a ramped surface to the locking latch allowing the door to close and latch just like a fixed strike would. However, an electric strike’s ramped surface can, upon command, pivot out of the way when the lock on the door is in the locked position and the door is opened, allowing a user to open the door without operating the mechanical lock or using a mechanical key. After the door is opened past the keeper, the keeper returns to its standard position and re-locks when power is removed or applied, depending upon the strike’s configuration.

Electric strikes are generally available in two configurations:

  • Fail-secure. Also called fail-locked or non-fail safe. In this configuration, applying electric current to the strike will cause it to unlock. In this configuration, the strike would remain locked in a power failure, but typically the mechanical lock can still be used to open the door from the inside for egress from the secure side. These units can be powered by alternating current, which will cause the unit to buzz, or DC power, which offers silent operation, except for a “click” while the unit is powered.
  • Fail-safe. Also called fail-open. In this configuration, applying electric current to the strike will cause it to lock. It operates the same as a magnetic lock would. If there is a power failure, the door opens merely by being pushed or pulled. Fail-safe units are always operated with direct current.
  • Our EL-ANSI-111 strike is quickly reversible from fail safe to fail secure (and back again if needed).  allow the reversing of the function within seconds with only the movement of two external screws

 

 

We offer a extensive range of Electric Locking, Door Entry and Access control systems and solutions which can be used for a variety of situation – whether it be for controlled access to an office, hospital, club or any place of work we will have the correct solution for you.

So If the EL-EURO-SECURE Fail Secure Euro Release (FAIL LOCK ) is not the unit for you we will have another solution!

Try us and put us, our products, our service and price to the test, you wont be disappointed.

Lock

Surface / Rim Plates

Flush Plate

Download Guide Download Quick PDF