Access Security Products

Solenoid Drop Bolt


Product Code: EL-AER134

Monitored Solenoid Drop Bolt

Fully concealed  Dual voltage Shoot Bolt is ideal for mounting vertical and horizontal and suits inward, outward and double swing doors. Auto lock and relock timer. Surface and Glass Kits Available

 

Category:

Description

Product Code: EL-AER134

Monitored Solenoid Drop Bolt

Product Features
Input: 12 – 24vDC
Bolt Strength: Upto 3000lbs / 1350kg
Current Draw: 300ma Idle – 1amp
Type: Fail Safe
IP Rating: Internal Use only
Lock Monitoring: Yes
Door Monitoring: Yes
Fitting: Flush
Plate: 210h x 34w x 3d mm
Body: 157 x 33w x 38d mm

 

Shoot Bolt – Solenoid Bolt – Electric Drop Bolt

Shoot Bolt offer a discreet and secure locking solution. Most can be mounted vertically or horizontally and are available in a range of options including dual voltage, Slimline fitting, Door and lock monitoring, Surface and glass fitting options.

The monitored option simply means that the door status can be monitored to determine and confirm if the door is open or closed. Inside the drop bolt is a set of voltage free Hall Effect contacts providing Normally Open and Normally Closed contacts (N/O & N/O)

With these contacts you can connect them to a sounder, buzzer, alarm system, light or anything else that would require a voltage set of free contacts to trigger the device when the drop bolt and the catch plate is separated. Ideal for aluminium, steel or timber inward or outward opening doors or double swing doors for vertical or horizontal installation

 

We offer a extensive range of Electric Locking, Door Entry and Access control systems and solutions which can be used for a variety of situation – whether it be for controlled access to an office, hospital, club or any place of work we will have the correct solution for you.

So If the EL-AER134 Solenoid Drop Bolt is not the unit for you we will have another solution!

Try us and put us, our products, our service and price to the test, you wont be disappointed.

When should I use Shoot bolt for securing a door ?
We would advise that you use shoot bolt only if you have good quality doors that return to the exact same closed position each time and is unlikely to suffer abuse from usage or weather conditions

What power supply should I use?
Double check you lock operating voltage firstly then remember and allow for a minimum of 30% extra amps – This is due to most Shoot bolts using 1 amp on pull in

How easy is it to fit?
This will depend upon experience but typically, it will take about an hour

Bolt

Keeper

Fixing Kit

Instructions

Download Quick PDF

 

Due to the initial ‘Pull in’ current draw of the unit, it is recommended that you use a 2amp 12v dc or 1amp 24v dc power supply

Periodically clean the surface of the drop bolt and catch plate, however, do not lubricate or oil the drop bolt

DO NOT INSTALL IN THE GROUND