sales@accesssecurityproducts.co.uk

01327 358888

Split Access Control reader with separate controller

Split Access Control reader with separate controller Door Entry Systems
Split Access Control reader with separate controller Door Entry Systems
Split Access Control reader with separate controller Door Entry Systems

Split Access Control reader with separate controller


Product Code: RD-26-SPLIT

Split Slimline proximity reader with separate controller all built into 1amp 12volt PSU

Access control card reader providing proximity entry for up to 500 users,  a higher level of security is achieved with its separate control board

 

Category:

Description

Split Access Control reader with separate controller

Product Code: RD-26-SPLIT

Main features
Reader:
Type: Black – ABS Plastic Body
Voltage: 12v DC input – 12v AC input
IP rating: IP66
Size: 85 x 45 x 22mm

Power Supply
Type: Switchmode
output: 13.8v DC
Load: 1amp
Size: 197 x 265 x 72mm

Keypad Controller
Type: Standalone pin and prox
Users: 500
Fob type: wiegand 125khz
Size: Built in to above 1amp PSU 197 x 265 x 72mm

RD-26-500 Slimline proximity reader with separate controller
Key Features:
A) Seperate control for greater security level
B) Non-volatile memory in the event of a power failure
C) 3 x LED display indication status

 

We offer a extensive range of Digital coded access keypads, and access control systems which can be used for a variety of door entry access control solutions – whether it be for controlled access to an office, house or garage we will have the correct solution for you.

Our range of standalone or self-contained digital keypads and key fob readers have between 1 and 3 relay outputs – with or without proximity card/key fob reader and are ideal for either internal or external use available with single 12v dc or dual 12v – 24v AC/DC input

If the Product Code: RD-26-500 Split Slimline proximity reader with separate controller is not the unit for you we will have another solution!

Try us and put us, our products, our service and price to the test, you wont be disappointed.

Download Quick PDF

Fixing Kit

Instructions

Can I use the RD-26-500 card reader outside?
Yes, it is IP66 rated and totally protected against dust and protection against heavy seas, or powerful jets of water however the PSU and controller must be stored indoors

Will the RD-26-500 card reader use any standard Wiegand RFID 125 khz card or key fob?
Yes it can use either

Can I use two RD-26-500 card readers to access and exit a door?
Yes, please refer to the drawings we have for download that will show you this

If I wanted two RD-26-500 card readers, can I program the same card or key fob to activate both units?
Yes, you can use the same fob for unlimited readers

Can I operate my automatic gate with this?
Yes, please refer to the drawings we have for download that will show you this

What cable do I need?
You can use any cable you like for this, we suggest using standard alarm cable that you can purchase this from us also.

It is advisable to periodically clean the keypad facia to prevent ingress of dirt or general grime which will accumulate between the buttons and could cause the keypad buttons to become “Sticky”. This is common with all mechanical moving parts and more so dependent upon the installation area and general usage, however, regular preventive maintenance will ensure long lasting operation of the item

Related products